TRW Hydraulic Motor

TRW Hydraulic Motor




TRW ROSS TORQMOTORS K11 TF SERIES TORQMOTOR is for heavy-duty continuous applications that require up to 12 HP continuous with 20 HP peak. 4.9 CIPR to 29 CIPR, work PSI 49 to 18, 2000 PSI. Roller stator - 2 needle bearings in housing and 2 needle thrust bearings. Heavy back cover with 7 bolts
TB SERIES TORQMOTOR is for light-duty intermittent applications that require up to 4-3/4 HP continuous with 10 HP peak. 2.7
CIPR to 24 CIPR, work PSI 2.7 to 12, 1800 PSI. Roller stator - 1 bushing in housing and 1 needle bearing. Standard back cover with 5 bolts.
TG SERIES TORQMOTOR is for heavy-duty continuous applications that require up to 17 HP continuous with 35 HP peak. 8.9 CIPR to 58.5 CIPR, work PSI 8.9 to 20.6, 3000 PSI. Roller stator- 2 needle bearings in housing and 2 needle thrust bearings.
Heavy back cover with 7 bolts.
TE SERIES TORQMOTOR is for medium-duty intermittent applications that require up to 6 HP continuous with 13 HP peak. 2.7
CIPR to 24 CIPR, work PSI 2.7 to 12, 2000 PSI. Roller stator - 2 needle bearings in housing and 1 needle thrust bearing. Heavy back cover with 7 bolts.
THE TG, TF, TE, & TB TORQMOTORS ARE DESIGNED TO CARRY SIDE LOADS OF UP TO 2,000 POUNDS; THIS ALLOWS THE MOTOR TO DELIVER ITS FULL TORQUE, DRIVING A SPROCKET, GEAR OR PULLEY ON THE STANDARD OUTPUT SHAFT

TRW Hydraulic Motor

Categories

Contact Us

Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 8.3 ms