Prince Hydraulic Valve

Prince Hydraulic Valve

Prince Manufacturing manufactures and maintains a large selection of standard directional control and accessory valves. The model SV and Series 20 stackable, directional control valves provide our customers with various options as to valve configuration in both a twelve and twenty gallon per minute range. Contact a Prince representative for custom applications.

Prince offers a wide and diverse variety of standard hydraulic valves which include the following:
Stack Valves
Mono-Block Valves
Selector Valves
Loader Valves
Relief Valves
low Control Valves

ORDERING INFORMATION:
The Following Is a Listing of Valve Sections Available from Stock on a Standard Basis.
STANDARD SECTIONS AVAILABLE:

INLET SECTIONS - All Have Both Top and Side Inlet Ports

Part No. Relief Type and Setting Port Size
SVI21 No Relief #10 SAE ORB (7/8-14 THD)
SVI24 Adjustable Low Pressure Relief Set at 1000 PSI #10 SAE ORB (7/8-14 THD)
SVI15 Adjustable High Pressure Relief Set at 2000 PSI #8 SAE ORB (3/4-16 THD)
SVI25 Adjustable High Pressure Relief Set at 2000 PSI #10 SAE ORB (7/8-14 THD)

WORK SECTIONS - All Have #8 SAE ORB (3/4-16 Thd) Ports, Load Check and Standard Lever Handle

Part No. Spool Type and Action
SVW1AA1 4-Way Single-Acting with Spring Center
SVW1BA1 4-Way Double-Acting with Spring Center (Work Ports Blocked in Neutral)
SVW1BB1 4-Way Double-Acting with 3-Position Detent (Work Ports Blocked in Neutral)
SVW1CA1 4-Way Motor Spool with Spring Center (Work Ports Open to Tank in Neutral
SVW1CB1 4-Way Motor Spool with 3-Position Detent (Work Ports Open to Tank in Neutral)
SVW1DD1 4-Way 4-Position Float with Spring Center and Float Detent
SVL1CA1 4-Way Spool with Spring Center (with Pilot Operated Checks on Both Work Ports)
SVM1ES1 4-Way Meter Spool with Spring Center (Work Ports Blocked in Neutral)

PORT RELIEF WORK SECTIONS - All Have #8 SAE ORB (3/4-16 Thd) Ports, Load Check and Standard Lever Handle. Models with Relief Factory Set at 2000 PSI at 3 GPM.

Part No. Spool Type and Action Port Reliefs
SVH1BA1AA 4-Way Double-Acting with Spring Center Port Relief Plugged
SVH1BA1GG 4-Way Double-Acting with Spring Center Adjustable 1500-3000 PSI
SVH1DD1AA 4-Way 4-Position Float with Spring Center & Float Detent Port Relief Plugged
SVH1DD1BB 4-Way 4-Position Float with Spring Center & Float Detent Shim Adjust. 1500-3000 PSI
SVR1ES1AA 4-Way Meter Spool with Spring Center Port Relief Plugged
SVR1ES1GG 4-Way Meter Spool with Spring Center Adjustable 1500-3000 PSI
SVS1GA1GG 4-Way Double-Acting Series with Spring Center Adjustable 1500-3000 PSI
SVS1GA1AA 4-Way Double-Acting Series with Spring Center Port Relief Plugged

OUTLET SECTIONS - All Have Both Top and Side Outlet Ports

Part No. Exhaust Options Port Size
SVE11 Open Center Outlet with Conversion Plug #8 SAE ORB (3/4-16 THD)
SVE21 Open Center Outlet with Conversion Plug #10 SAE ORB (7/8-14 THD)
SVE22 Power Beyond Outlet with #8 SAE Beyond Port #10 SAE ORB (7/8-14 THD)
SVE23 Closed Center Outlet #10 SAE ORB (7/8-14 THD)
SVE26 Open Center Outlet Pressure Build-Up Valve #10 SAE ORB (7/8-14 THD)
SVE27 Power Beyond Pressure Build-Up Valve #10 SAE ORB (7/8-14 THD)

TIE ROD KITS

Part No. Part No.
Tie Rod Torque
150in-lbs � 6in-lbs
(12-1/2 ft-lbs �1/2)
660401001 1 Section* 660401006 6 Sections*
660401002 2 Sections* 660401007 7 Sections*
660401003 3 Sections* 660401008 8 Sections*
660401004 4 Sections* 660401009 9 Sections*
660401005 5 Sections* 660401010 10 Sections*
*Number of Work Sections

SPECIAL INLET AND OUTLET SECTIONS AVAILABLE: Sections other than standard models listed can be made to order. Use order code Matrix below to generate a model number that meets your requirements. If you prefer, contact your Sales Representative with your specific requirements and a model number will be assigned for you. The model number can be used for future orders. A minimum order quantity will apply to special valves. Please consult Sales Representative.

Prince_Model SV_Order Code


Prince Hydraulic Valve

Categories

Contact Us

  • A&S Hydraulic Co., Ltd
  • 469 Xinsheng Road, Gaoxin District, Chengdu, China
  • Tel: +86-28-65376553
    Cell: +86-18398982650
  • Fax: +86-28-86129221
  • hydraulic@esmachinery.com
  • Contact Person: Sandra Yan
  • Like Us:
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 11.3 ms